Attendant Override; Attendant Automatic Hold; Automatic Answer Mode; Abandoned / All Call - Iwatsu ENTERPROSE-CS Owner's Manual

Attendant Automatic Hold

Allows you to place your current call on Hold automatically by pressing a key
representing a new call to be answered.
To place a call on Hold without using the Hold key HOLD/DND:
 Press the key representing the new call

Attendant Override

Allows you to notify an extension user that is in Do Not Disturb that you wish
to speak with them. The extension user is notified by tones through the
speaker of a Digital Telephone and the ringing of a Single Line Telephone.
When calling an extension that is in Do Not Disturb:
 Do not hang up
 Press the Override key OVER
 Wait for a reply

Automatic Answer Mode

Allows you to direct outside calls to be answered by a prerecorded message.
There are two answering modes for this feature. For example, this feature can
be used to inform outside callers that the office is closed for the day. This
feature requires the use of the Message Card. A programming option may be
enabled to allow the ECS to automatically switch to the Automatic Answer
Mode at a certain time. You must manually switch the system to the normal
mode.
To turn Automatic Answer Mode on:
 Press the Automatic Answer Mode key AUTO and the lamp for that key
will be flashing red for Mode 1 (Day Mode)
 Press the Automatic Answer Mode key AUTO a second time and the
lamp for that key will be solid red for Mode 2 (Night Mode)
To turn Automatic Answer Mode off:
 Press the Automatic Answer Mode key AUTO until the lamp for that
key is off

Abandoned / All Call

Allows you to delete all stored call records from system memory.
 Press the Speaker key SPKR
 Press the Call Storage Delete key UAD
 Enter your station password
ATTENDANT POSITION USER GUIDE - 180