Dometic 57908.321 Installation Instructions Manual page 16

Installing unit with 3105007.XXX or 3105935.XXX
Return Air Cover, continued from page 15, column A.
7. Position the relay control box on the tabs of the
ceiling template. Secure the control box to the tem-
plate with 2 blunt self tapping screws. See FIG.
19A.
C. INSTALLATION OF INSIDE DECORATIVE COVER.
1. Remove the return air grill from the return air cover.
2. Place the return air cover up to the ceiling tem-
plate.
3. Install cover to template with #8 x 3/8" pointed Phil-
lips head screws provided (6 required).
FIG. 19A
Hole
Plugs
4. Reinstall filter return air grill into return air cover.
Align tabs with mating notches and snap into place
5. Install two hole plugs into screw holes in back of
return air cover. See FIG. 19A.
6. This completes the installation of the air conditioner.
We recommend that power be supplied to the air
conditioner and check for proper operation. Refer to
Operating Manual or User's Guide for a description
of the air conditioner operation.
INSTALLATION INSTRUCTIONS DUCTED CCC
Return Air
Cover
Return
Air Grill
Installing unit with 3308120.XXX Genesis Air Filtration
System, continued from page 15, column B.
2. Slide the filter from the right side (looking toward
the RV front) over the wires. Make sure the wires
are secured above the filter and are out of its way.
See FIG. 19B.
3. Place grill on return air cover and snap in place.
Decal is on end over circuit board.
4. Place slide handle through slots in grill into the
slide posts. Handle will fit in either direction. See
FIG. 19B.
FIG. 19B
Foam
Divider
Slider
Return Air
Cover
Handle
5. This completes the installation of the air conditioner.
We recommend that power be supplied to the air
conditioner and check for proper operation. Refer to
Operating Manual or User's Guide for a description
of the air conditioner operation.
16
Ceiling
Template
Filter
Grill