Saeco TALEA Service Manual page 52

05 SERVICE MODALITY
Function group t.2 - Heater
t.2 - heating unit
next
boiler_temp (C°) =79.8
cup
Boiler
heater
Function group t.3 - Water/steam system
t.3 -
next
hydraulic circuit
fl ow_meter (p/s) = 0
driptray_sens = OFF
waterlevel_sens = ON
knob_milk = OFF
knob_water&steam = ON
knob_closed = OFF
Milk Island present = OFF
caraffe present = OFF
valve
pump
water
Function group t.4 - Grinder
t.4 - grinder unit
next
pulses_counter = 0
delay_time (msec) = 0
bean_door = ON
bean_alarm = OFF
grinder * bean
Page 10 / 17
boiler_temp (C°)
cup heater:
boiler:
*:
*
fl ow_metre(p/s):
driptray_sens:
waterlevel_sens:
knob_milk:
knob_water/steam
knob_closed:
milkisland present:
carafe present:
*
valve:
pump water:
*:
pulses_counter:
delay_time (msec)
bean_door:
bean_alarm:
grinder:
*:
bean_test:
test
TALEA / ODEA - LINE
Temperature recorded by the
temperature sensor.
Cup warmer heats up
Continuous-fl ow heater heats up
no function
Flowmetre pulses (12-17)
ON - Residual water tray full
ON - Water tank full
ON - Hot water / steam valve in pos.
Milk Island
ON - Hot water / steam valve in pos.
hot water/steam
ON - Hot water / steam valve in pos.
closed
ON - Milk Island adapter detected
ON - Carafe microswitch activated
Magnet valve activation
Pump activation
no function
Coffee grinder pulses (Hall sensor)
Coffee grinder pulse msec/pulse
ON - Reed sensor bean cover
activated
ON - Beans low (speed exceeded)
Coffee grinder activation
no function
The machine starts grinding and the
relevant message is shown next to
bean_alarm (ON/OFF)
Saeco Internationa Group