Saeco odea giro plus sarlee tit sup031or (48 pages)
Summary of Contents for Saeco 10002778
Page 1
Operation and maintenance manual Before using the machine, please read the attached operating instructions. Carefully read the safety rules. FOR HOUSEHOLD USE ONLY...
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid.
Page 3
This appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center. Do not immerse machine in water. To reduce the risk of fire or electric shock, do not disassemble the machine. There are no parts inside the machine serviceable by the user.
CONTENTS GENERAL INFORMATION ... 3 TECHNICAL DATA ... 3 APPLIANCE ... 4 ... 4 ACCESSORIES INSTALLATION ... 5 ... 5 STARTING THE MACHINE ... 6 SETTING THE LANGUAGE ... 6 SETTING THE WATER HARDNESS ... 7 INTENZA WATER FILTER CONTROL PANEL ... 8 ADJUSTMENTS ...
GENERAL INFORMATION This coffee machine is made for brewing espresso coffee using coffee beans, and it is equipped with a device to dispense steam and hot water. The machine is designed for domestic use only, and is not suitable for heavy or professional use. Warning: no liability is assumed for any damage caused by: •...
APPLIANCE Coffee bean hopper Pre-ground bypass doser Coffee bean hopper lid Cup warming surface Power button Control panel Service door SBS dial Dispensing head Dregdrawer Drip tray + grill Brew group Hot water / steam knob Hot water / steam wand Milk Island connection Drip tray Water tank...
STARTING THE MACHINE Make sure the power button is not pressed and the machine is turned off. Check the machine features on the label on the bottom of the appliance. Remove the coffee bean hopper lid. Fill the hopper with coffee beans. Fill the tank with fresh drinking water.
INSTALLATION SETTING THE LANGUAGE When the machine is switched on for the fi rst time, it requires the selection of the desired language. This allows you to adjust the parameters of the beverages to the typical parameters of the country where the machine is used.
INTENZA WATER FILTER To improve the quality of the water you use, and to extend the life of your machine at the same time, it is recommended that you install the water fi lter. After installation, select the water fi lter function under the maintenance menu (see page 20).
CONTROL PANEL Access the programming menu Click wheel Selects the aroma (amount of coffee ground per cup) or selects pre-ground coffee • Press the button twice to make 2 cups. This operation can be performed up until the grinding of the fi rst cup is complete. selected espresso coffee •...
AROMA OPTI-DOSE (ADJUSTS THE COFFEE DOSE PER CUP) It is possible to choose three aroma options (strong, medium and mild) by pressing the button. These indicate the quantity of coffee the machine grinds for each beverage. This button is also used to select the pre-ground coffee function. SELECT THE AMOUNT OF COFFEE TO BE GROUND BEFORE DISPENSING THE BEVERAGE.
ADJUSTMENTS DRIP TRAY HEIGHT ADJUSTMENT Adjust the drip tray to the appropriate cup size before selecting the beverage. To raise the drip tray, press lightly on the lower part of the button. To lower the drip tray, press lightly on the upper part of the button.
COFFEE GRINDER ADJUSTMENT The machine enables a slight adjustment of the coffee grinder. Coffee may be ground according to your own tastes. The adjustment must be performed using the small pin located inside the coffee bean hopper. This must be pressed down and turned using the supplied grinder adjustment key only.
BEVERAGE DISPENSING COFFEE BREWING CAN BE STOPPED AT ANY TIME BY PRESSING THE BUTTON AGAIN. THE STEAM WAND MAY REACH HIGH TEMPERATURES: DANGER OF SCALDING. DO NOT TOUCH IT WITH BARE HANDS. Check that all the containers are clean. To carry out this operation, follow the instructions in the “Cleaning and Maintenance”...
BREWING WITH PRE-GROUND COFFEE The machine allows you to use pre-ground and decaffeinated coffee. Pre-ground coffee must be scooped into the bypass doser next to the coffee bean hopper. Only use coffee that is ground specifi cally for espresso machines and never coffee beans or instant coffee. WARNING: ONLY PUT PRE-GROUND COFFEE INTO THE BYPASS DOSER WHEN YOU WISH TO BREW THIS TYPE OF BEVERAGE.
BEVERAGE DISPENSING HOT WATER DISPENSING DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS POSSIBLE. THE HOT WATER/STEAM WAND MAY REACH HIGH TEMPERATURES: DO NOT TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY. Place a container beneath the hot water / steam wand.
DISPENSING STEAM DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS POSSIBLE. THE HOT WATER/STEAM WAND MAY REACH HIGH TEMPERATURES: DO NOT TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY. Place a container with the beverage to be frothed beneath the hot water/steam wand.
BEVERAGE DISPENSING MAKING CAPPUCCINO DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS POSSIBLE. THE HOT WATER/STEAM WAND MAY REACH HIGH TEMPERATURES: DO NOT TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY. Fill 1/3 of the cup with cold milk. Turn the knob to the position.
This device, which may be purchased separately, enables you to easily and comfortably prepare delicious cappuccinos. Warning: before using the Milk Island, read the manual and all precautions carefully for correct use. Important note: the quantity of milk in the carafe must never be below the “MIN”...
BEVERAGE SETTINGS Every beverage can be programmed according to your individual tastes. QUICK PROGRAMMING You can program the quantity of coffee that will dispense into the cups when any beverage is selected. Select the type of beverage you want to program, then press and hold the (for example): programming espresso coffee...
Page 21
Check that the water tank and coffee bean hopper are full; place the cup under the dispensing head. espresso coffee Select the beverage to program. Press the button to confi rm. espresso coffee Change the coffee quantity by navigating the click wheel with your fi...
PROGRAMMING THE MACHINE Some of the machine’s functions can be programmed according to your individual preferences. beverage settings 1 Press the 2 Navigate the click wheel with your fi nger to: select the functions change the function settings. Press the - confi...
MACHINE SETTINGS machine settings language English water hardness acoustic alarm water filter alert rinsing cup-warming surface clock setting 2.7.1 time setting 2.7.2 time format 2.7.3 date setting tuesday 18/04/06 2.7.4 date format DD/MM/YYYY To change the machine operation settings, press the “machine settings”...
PROGRAMMING THE MACHINE MAINTENANCE maintenance water filter 3.1.1 litres left 3.1.2 3.1.3 descaling 3.2.1 litres left 3.2.2 group wash 3.3.1 To access the machine maintenance settings, press the “maintenance” and press the fi nger. Access the water fi lter menu. Display how many liters of water can still be used water filter before changing the water fi...
ENERGY SAVING (STAND-BY) energy saving stand-by timer setting Monday Tuesday Wednesday Thursday Friday Saturday Sunday SPECIAL FUNCTIONS special functions reset settings execute now To adjust the energy saving parameters of the machine, press the button, select "energy saving" (stand-by) and press the the click wheel with your fi...
MAINTENANCE Descaling cycle > maintenance > descaling > execute now This menu performs the automatic descaling cycle. Descaling is necessary every 1-2 months, when water dispenses more slowly than normal, or when the machine indicates the need to descale. The machine must be turned on and will automatically manage the dispensing of the descaling agent.
Page 27
insert descaler ok to start cycle When the above message appears, the boiler is at the right temperature. descaling cycle please wait The machine begins to dispense the descaling solution through the hot water/steam wand. The dispensing occurs at predetermined intervals, in order to allow the solution to settle.
MAINTENANCE Turn the knob until it is in the rest position ( ). Brew Group Washing > maintenance > group wash This function is used to clean the machine’s internal circuits used for brewing coffee. To rinse the brew group, simply clean with water as shown on page 28. This wash completes the maintenance process of the brew group.
MAINTENANCE DURING OPERATION During normal operation, the “empty grounds” message will appear. This operation must be performed when the machine is on. Remove the dregdrawer. GENERAL MACHINE CLEANING The cleaning described below must be performed once a week. Note: if water remains in the tank for several days, do not use it. WARNING! Never immerse the machine in water.
CLEANING AND MAINTENANCE CLEANING THE BREW GROUP The brew group must be cleaned at least once a week. Before removing the group, remove the dregdrawer as shown on page 27. Wash the brew group with lukewarm water. Lubricate the brew group after approximately 500 brewing cycles. The brew group lubricant can be purchased through Saeco or authorized service centers.
GUIDE MESSAGE THAT APPEARS out of service (xx) restart to fix… close coffee bean lid fill container wth coffee insert the brew group insert grounds drawer empty grounds empty grounds drawer close door fill the water tank. empty the drip tray change filter carafe missing milk island missing...
TROUBLESHOOTING - SAFETY RULES ROBLEMS The machine does not turn on. Hot water or steam is not dispensed. Coffee has little crema. The brew group does not come out. The machine grinds the coffee beans but no coffee comes out. (see note) The coffee is too weak.
IN CASE OF EMERGENCY IMMEDIATELY UNPLUG THE CORD FROM THE OUTLET. ONLY USE THE APPLIANCE • Indoors. • For preparing coffee, hot water and for frothing milk. • For domestic use. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
SAFETY RULES concentration of dust or oily substances suspended in the air. • Do not install the machine on top of other appliances. DANGERS • The appliance must not be used by children and persons who have not been informed of its operation. •...
Page 35
SAECO INTERNATIONAL GROUP S.P.A - Via Torretta, 240 - 40041 Gaggio Montano (Bo) - Italy declare under our responsability that the product: to which this declaration relates is in conformity with the following standards or other normative documents : • Safety of household and electrical appliances - General requirements EN 60335-1(2002) + A1(2004) + A2(2006) + A11(2004) + A12(2006) •...