Cycle parts
Atlantic 500
REMOVING THE HELMET COMPARTMENT
Remove the saddle, see (REMOVING THE SADDLE).
Remove the central tunnel, see (REMOVING THE
CENTRAL TUNNEL).
1
Remove the left and right side panels (see REMOV-
ING THE WHOLE SIDE PANELS).
Unscrew and remove the two screws (1), making sure
to keep the relevant washers.
(Repeat this operation on the right side also)
Unscrew and remove the two screws (2) that fasten
the saddle lock (3) to the helmet compartment and
3
free the lock from the compartment.
2
Slide out the relay (4) by pulling it upwards.
4
Remove the battery cover, see (REMOVING THE
5
BATTERY).
Remove the battery, see (REMOVING THE BAT-
TERY).
5
Disconnect the electric connections (5).
5
7-18
chap. 7
Release 00
2002-09