Electrical system
HIGH BEAM BULBS
•
Turn the bulb socket/bulb (8) counter-clockwise
and remove it from the reflector seat.
CAUTION
To remove the bulb socket/bulb from the connec-
tion, be especially careful not to damage the two
tabs (9).
•
Remove the bulb (10).
•
Correctly install a new bulb of the same type.
•
For reassembly, proceed in reverse order.
PARKING LIGHT BULBS
CAUTION
To remove the bulb socket do not pull the electri-
cal cables.
•
Working from the front of the vehicle, grasp the
bulb socket (11), turn it and extract it from the
seat.
•
Remove the parking light bulb (12) and replace it
with another of the same type.
CHANGING TAILLIGHT BULBS
Read carefully (BULBS).
The taillight houses:
–
Two parking light/brake light bulbs (1).
–
Two rear direction indicator lamps (2).
To replace:
•
Lift the saddle, see (LOCKING/RELEASING THE
SADDLE).
NOTE
The following information refers to a single
indicator, but is applicable to both.
•
Remove the knob (3) fastening the set of taillights
to the vehicle.
6-34
Release 00
2002-09
9
10
8
11
1
2
chap. 6
Atlantic 500
12
1
2