Horizontal Adjustment Headlight Beam; Changing Fuses - APRILIA Atlantic 500 Workshop Manual

Electrical system
HORIZONTAL ADJUSTMENT HEADLIGHT
BEAM
• Remove the front hood, see (REMOVING THE
FRONT HOOD).
To adjust the headlight beam:
• Adjust the knob (as shown in the figure) from the
front of the vehicle.
• Turn CLOCKWISE to move the beam to the
RIGHT (facing the direction in which the vehicle
travels).
• Turn COUNTER-CLOCKWISE to move the beam
to the LEFT (facing the direction in which the
vehicle travels).

CHANGING FUSES

Carefully read (MAINTENANCE).
CAUTION
Do not attempt to repair faulty fuses.
Never use any fuses other those specified.
Such use could damage the electrical system or
even cause a fire, in the event of a short-circuit.
NOTE
If a fuse blows frequently, there is probably a
short circuit or overload in the electrical system. In this
case see an aprilia dealer.
• Check the fuses whenever an electric component
does not work or works irregularly, or if the vehicle
fails to start.
• First check the 3 A and 15 A fuses and then the
20-30 A fuses.
To check:
• Remove the battery cover, see (REMOVING THE
BATTERY COVER) or remove the front hood, see
(REMOVING THE FRONT HOOD).
• Remove the fuses one by one, and check to see
whether the filament (1) is blown.
• Before replacing the fuse, if possible, try to deter-
mine the cause of the problem.
• Replace any blown fuse with a new fuse with the
same amperage rating.
NOTE
If you use the spare fuse, replace it as soon
as convenient.
• Replace the battery cover, see (REMOVING THE
BATTERY COVER) or replace the front hood, see
(REMOVING THE FRONT HOOD).
6-38
Release 00 2002-09
4
2
3
5 6
8
7
chap. 6
Atlantic 500
1
9