Electrical system
CHECKING THE RPM SENSOR
With the engine off:
•
Disconnect the three-way connector (1) and carry
out the relevant measurements.
Use a tester (scale x 100 Ω) to measure the
•
resistance between the sensor terminals, respect-
ing the relevant polarity (see figure).
Standard value: 680 Ω Ω Ω Ω Ω ± 10%
•
If the resistance is infinite or different from the
prescribed value, the sensor must be replaced.
6-12
Release 00
2002-09
Atlantic 500
1
-
+
Ω
+
chap. 6