Disconnect Button; Export Button; Pin Button; Pbc - SMC Networks SMCWUSB-N4 User Manual

Disconnect Button

Use this button to stop WPS action and disconnect the active link. You can then select
another profile from the Profile tab if one exists. If there are none, the Adapter selects any
non-security access point.

Export Button

Use this button to export the selected profile in the WPS Profile List to the Profile tab.

PIN Button

Use the PIN button at the bottom of the tab to start to add to the Registrar using the PIN
configuration method. Enter a PIN in the Pin Code field or read a PIN from your Enrollee
before clicking this button.
Note: After you click the PIN button, wait two minutes before clicking Rescan to rescan
networks.
To cancel this setup within the interval, restart PIN/PBC or click Disconnect to stop the
WPS connection.

PBC

Use the PBC button to add access points using the PBC configuration method.
Note: After you click the PBC button, wait two minutes before clicking Rescan to rescan
networks.
To cancel this setup within the interval, restart PIN/PBC or click Disconnect to stop the
WPS connection.

WPS associate IE Check Box

Check WPS associate IE to send an association request with WPS IE during WPS setup.
This is optional for STA.

WPS probe IE Check Box

Check the WPS probe IE check box to send a probe request with WPS IE during WPS
setup. This is optional for STA.
SMCWUSB-N4 300 Mbps Wireless USB Adapter User Manual
Using the SMC Wireless Utility (Mac)
65