Chapter 6 Wps Configuration; Pbc (Push Button Configuration) Method - SMC Networks PW-DN481D User Manual

PW-DN481D 150Mbps Wireless Lite-N PCI-E Adapter

Chapter 6 WPS configuration

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing
network quickly.
Note:
WPS function is not supported in Windows 7 OS.
If the wireless Router supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and router using either Push Button Configuration (PBC)
method or PIN method.
First, the WPS software should be installed. Insert the Resource CD into your CD-ROM drive, and
open the folder named PW-DN481D. Double-click WPS.exe in the proper folder to start the
installation, then the following screen for preparing setup will appear.
Figure 6-1
Then, please follow the clue of the Operation System to complete the WPS installation. After that,
WPS function can be enabled. Here we will introduce how to configure the WPS (For the
configuration of WPS, here takes the Wireless Router of our company for example).

6.1 PBC (Push Button Configuration) method

1. Firstly, press the WPS button directly on the front panel of the Router shown in Figure 6-2 .
33