Wps Profile List; Rescan Button; Pin Code; Config Mode - SMC Networks SMCWUSB-N4 User Manual

WPS Profile List

The WPS Profile List shows the profile, SSID, authentication, and encryption settings of the
WPS-enabled devices.

Rescan Button

Click Rescan to rescan all networks.
WPS Profile List
The WPS Profile List shows all of the credentials obtained from the Registrar. The list
includes the profile, SSID, authentication, and encryption settings. Double-clicking a row or
clicking a row and then clicking the Profile Detail button displays a screen with additional
information about security and key credentials.
If STA Enrollee, credentials are created with each WPS success.

If STA Registrar, the utility creates a new credential with a WPA2-PSK/AES/64Hex-Key

and does not change until the STA Registrar changes.
Note: Entries in the WPS Profile List are not displayed when the Config Mode drop-down
list is set to Enrollee.

Pin Code

The Pin Code field lets you enter an 8-digit PIN. It is required to enter a PIN code into the
Registrar when using the PIN method of WPS. Each network card has only one PIN code of
Enrollee. After entering a PIN in the PIN Code field, click the Renew button to renew the
PIN code.

Config Mode

Config Mode lets you select whether the Adapter is acting as an Enrollee or an external
Registrar.

Connect Button

Use this button to connect to the selected network inside credentials. The active selected
credential is similar to the active selected profile.

Rotate Button

Use this button to connect to the next network inside credentials.
SMCWUSB-N4 300 Mbps Wireless USB Adapter User Manual
Using the SMC Wireless Utility (Mac)
64