Setup - BenQ PX9600 User Manual

Setup

Auto Search
This function enables the projector to detect the input signal and to switch the input mode
automatically when the project is turned on. Set it to On to enable Auto Search function or Off to
disable it.
Auto Power Off
This function enables the projector to enter standby mode automatically when no input signal is
detected more than 15 minutes. Set the function to On to enable Auto Power off or to Off to
disable it.
Auto Power On
This function enables the projector to be turned on automatically when the power cord is plugged
into the AC outlet or the breaker switch is turned. Set the function to On to enable this function.
This function is activated by below conditions
• The Main Power switch on the projector has to be switched to On.
• The projector should be turned off by unplugging power cord or the breaker switch directly, Auto Power On will
be activated next time when you plug in the power cord or turn on breaker switch.
42