Projection Mode - BenQ PX9600 User Manual

For lamp protection, the lamp switching may take several minutes.

Projection Mode

Projection Mode enables you to set how the projected image is displayed. Select from the following.
Front
Standard forward facing projection (Default setting).
Rear
Standard rear projection. Enables the projector to produce the image from behind the screen by
reversing the image.
Ceiling+Front
Forward facing ceiling mounted projection. Enables ceiling mounted projection by inverting the
image.
Ceiling+Rear
Rear ceiling mounted projection. Enables ceiling mounted projection from behind the screen by
inverting and reversing the image.
Fan Mode
Fan control is used to set the speed of the internal cooling fan according to the installation
condition.
Normal
Set Fan Speed to Normal if the projector is set up on a table or ceiling mounted at altitudes under
5000 feet/1500 meters.
High
Set Fan Speed to High if the projector is set up on a table or ceiling mounted at altitudes over
5000 feet/1500 meters.
UP/Down
Set Fan Speed to Normal if the projector is set up at tilt angle over 10 degree, the fans will run at a
high speed.
Please make sure fan mod is set to UP/Down if the project is set up at tilt angle over 10 degree upward or downward,
actual Lamp life may be short than expected lamp life.
49