Aspect Ratio - BenQ PX9600 User Manual

® TM
DLP Link
® TM
Set DLP Link On to view 3D content, Off to ending 3D projection.
® TM
When DLP Link
® TM
DLP Link Invert
Set the video for your left and right eyes.
• For viewing 3D image, the source device should support the field sequential format.
• If the projector, 3D playback device or 3D LCD glasses are not set properly, you may experience eye strain and
not be able to view the image in 3D.
• For better signal receiving, recommend to view 3D images in front of the screen directly as much as possible. See
the operation manual of your 3D LCD glasses.

Aspect Ratio

Select from Normal, Full, 4:3, 16:9, as follows:
Normal
the image will be displayed at its intended aspect ratio, filling either the full height or width of the
screen as appropriate.
Full
the image will fill the height and width of the screen, depending on the resolution of the projector.
4:3
the image will be displayed with a 4:3 aspect ratio, fitting the full height and/ or width of the screen,
depending on the resolution of the projector.
16:9
the image will be displayed with a 16:9 aspect ratio, fitting the full height and/or width of the screen,
depending on the resolution of the projector.
44
is set to on, Keystone, Aspect Ratio and Image Resizing may not work fully or may not be available.