Unpacking; Contents Of The Shipping Containers; Tools Required For Assembly & Adjustment - Jet JWCS-10 Owner's Manual

Unpacking

Open shipping cartons and check that all parts are
intact. Report any damage immediately to your
distributor. Read the instruction manual thoroughly
for assembly, alignment,
instructions.

Contents of the Shipping Containers

Box One:
1 XACTA Fence II
1 Lock Lever Knob
Box Two:
1 Front Rail
1 Back Rail
1 Guide Tube
3 Black Plastic End Caps
1 Hardware Bag containing:
00014 ea 1/4-20 x 1-1/2 Hex Cap Screws
00007 ea 1/4-20 x 3/4 Hex Cap Screws
00035 ea 1/4 Flat Washers
00021 ea 1/4 Lock Washers
00014 ea 1/4 Hex Nuts
Notes: The hardware should be packed in the
guide rail along with the end caps.
The contents of the hardware bag (shown at right)
are drawn full scale.
Note 1: Quantities for items in the hardware bag
are for the 52" rail system. If you purchased the
30" rail system, there will be extra hardware.
Note 2: If the optional wooden extension table is
not used, there will be extra hardware.
Tools Required for Assembly &
Adjustment
1 #3 Cross Point Screwdriver
2 10mm Open End Wrenches
1 Combination Square & Straight Edge
1 Electric Drill
1 1/4", 3/16, 5/16" Drill Bits
2 4"-6" C-Clamps
1 5mm, 6mm Hex Wrenches
and maintenance
6
Contents of Hardware Bag