Operation; Making A Call; Receiving A Call - Radio Shack 43-3905 User Manual

• Do not connect more than four Caller ID modules (including this
phone) that do not have Call Waiting to the same phone line.
• If you connect another type of Caller ID module that has Call
Waiting to the same phone line as your system, the Call Waiting
signal might be garbled or not received.

Operation

Making a Call

1. Pick up the handset and wait for a dial tone.
2. Use the keypad to enter the number you wish to dial. The
number appears on the display.
3. When you complete your call, hang up the handset. A few
seconds later, the number disappears, and the display
returns to normal.
n
If you dial a number over 15 digits, only the last 14
Note:
digits appear on the display.

Receiving a Call

When you receive a call, the phone rings and the NEW indicator
flashes. CALL# and the caller's number appear on the display. To
answer the call, pick up the handset.
Timer
This phone is designed with a clock timer to count the off-
hook time in seconds, up to one hour. The timer appears on
the display and starts to count up when you dial a number or
answer an incoming call.
n
Note: If you lift the handset and don't dial a number, the timer
appears and starts to count up after 10 seconds.
8