Storing The Last Number Dialed In Memory; Entering A Pause; Dialing A Memory Number; Using Another Line During A Conversation - Radio Shack 2 Line Owner's Manual

• To store an upper memory location,
simply press a memory location but-
ton (M1–M10).
• To store a lower memory location,
press , then press a memory
LOWER
location button (M1–M10).
5. Hang up the handset or press
again.
PHONE/HEADSET
Note: To keep a record of each stored
number, use a flat-blade screwdriver to
lift the plastic cover from the telephone
number index card. Write the name on
the index card. For easy reference, you
can use the shaded areas for upper
memory numbers and the blank areas
for lower memory numbers. Use a pencil
in case you want to change it later.
Storing the Last Number Dialed in
Memory
1. Pick up the handset or press
.
PHONE/HEADSET
2. Press .
STORE
3. Press
REDIAL/PAUSE
memory location.
Note: You can store the very last num-
ber dialed by pressing
but you should not press any digits
before pressing
REDIAL/PAUSE
wise, the number will be stored as a
pause.

Entering a Pause

In some telephone systems, you must dial an
access code (9, for example) and wait for a
second dial tone before you can dial an out-
side number. You can store the access code
with the phone number. However, you
should also store a pause after the access
code to allow the necessary connection time.
1. Press
2. Press
SPK-

Dialing a Memory Number

To dial a number stored in an upper memory
location, press the desired memory location
button.
To dial a number stored in a lower memory,
press
tion button.
USING ANOTHER LINE
DURING A CONVERSATION
To make a call on another line:
1. Press
SPK-
2. Press the other
3. Press the first call's
, then enter the
To answer a call ringing on another line:
,
REDIAL/PAUSE
1. Press
. Other-
2. Press the flashing
To switch between lines:
1. Press
2. Press the other
Operation
to enter a 2-sec-
REDIAL/PAUSE
ond pause.
again for a longer
REDIAL/PAUSE
pause.
Note: Each Pause entry uses one digit
of memory.
then the desired memory loca-
LOWER
to place the first call on
HOLD
hold.
button.
LINE
LINE
time to return to the first call.
to place the first call on
HOLD
hold.
button to answer
LINE
the incoming call.
to place your current call on
HOLD
hold.
button to make or
LINE
answer another call.
Note: If AC power fails, the telephone
can only be operated with Line 1.
button at any
9