T11: Creating A Banner Label Of Fixed Length - Brady TLS2200 User Manual

T11: Creating a Banner Label of Fixed Length

Note: This example assumes you have the banner marker roll PTL-43-439OR loaded
in your printer.
Print the following label to be used to identify an electrical conduit:
50
Setup Status:
H Justify
V Justify
Rotation
Format
Legend Type
1. Press <Shift> + <Form Clear> to delete all
lines of text and reset the font to the default value
of 19.
2. Press <Func> + <Setup> to access the Setup
Menu.
3. Press the <
press <Enter>.
Press the <
4.
Metric, then press <Enter>.
5. Press the <
Continuous, then press <Enter>.
Press the <
6.
then press <Enter>.
7. Use the <
fixed length repeat value to 143.000mm (5.62992
inches), then press <Enter>.
8. Press <Func> + <Exit> to exit back to the Text
Editor screen.
9. Enter 220 VOLTS on line one.
10. Press <Print>.
11. Press <Feed> to advance the banner to the cut
position.
TLS2200
Center
Center
0 Degrees
Component
Text
> key six times to select Units, then
▼
> or < > keys to toggle the Units to
▲ ▼
> key four times to select
▲
> key once to select Fixed Length,
▼
> and < > keys as needed to set the
▲ ▼
™
Thermal Transfer Printer User Manual