Barcode Symbology Specifications; Tls2200 ™ Printer Barcode Parameters - Brady TLS2200 User Manual

Barcode Symbology Specifications

Code 39: This code's symbology consists of the following characters:
Capital letters:
Numbers:
Space character:
Symbols:
Characters entered in lowercase are automatically converted to uppercase when printed.
Code 128: This code's symbology consists of three character sets. It allows you to directly
encode several functions between ASCII 0 and ASCII 31 automatically by inserting the
appropriate ASCII code in the text and choosing "Code 128 Auto" for the character set.
Character sets B and C can usually encode data in this way as well. All characters and numbers
and most symbols are available.
ITF 25: This code's character set consists of the numbers 0 to 9 only.
CodaBar: This code's character set consists of the following characters:
Capital letters:
Numbers:
Symbols:
™
TLS2200 Printer Barcode Parameters
Narrow Bar Width:
Wide-to-Narrow Ratio: 2 to 1
Quiet Zone:
Density:
Maximum Barcode Characters
The maximum number of characters for a bar code is 25. The following table lists the
maximum barcode characters per line:
Marker Width
12.7 mm (0.5 in.)
25.4 mm (1.0 in.)
38.1 mm (1.5 in.)
* Zero characters allowed on label (quiet zone and start/stop characters occupy entire width).
To create labels containing barcodes, follow the instructions below:
1. Press the <Barcode> key to toggle the legend type from Text to Barcode mode
(B is displayed on the Status Bar).
Press the <Func> + <Setup> keys to access the Setup Menu.
2.
™
TLS2200 Thermal Transfer Printer User Manual
A to Z
0 to 9
- . $ / + %
A, B, C, and D
0 to 9
- . $ / + :
2 dots (.25mm)
10 dots (1.25mm)
7.82 CPI
Max # of Barcode Chars Per Line
* 0
4
8
37