Tutorial Guide; Creating A One-Line Legend, Component Marker; Creating A Component Label Utilizing Multiple Font Sizes - Brady TLS2200 User Manual

Tutorial Guide

The following pages will provide step-by-step instructions for creating and printing labels
using a variety of different printer functions. With the exception of "Creating a Terminal
Block Label", the label part used in all tutorial examples is PTL-19-423. A sample roll of
this 1" x 1" label is provided in your TLS2200™ Thermal Labeling System package.

Creating a One-Line Legend, Component Marker

100A
Legend to be printed:
Setup Status:
H Justify: Center
V Justify: Center
Rotation: 0 Degrees
Format: Component
1. Check the STATUS BAR to make sure the unit is in Component mode. If not, press
<Shift> + <0> to toggle from Wiremarker mode to Component mode.
2. Enter 100A on line 1. (Font will be set at default size - 9)
3. Press <Print>.

Creating a Component Label Utilizing Multiple Font Sizes

MULTIPLE
Legend to be printed:
Setup Status:
H Justify: Center
V Justify: Center
Rotation: 0 Degrees
Format: Component
1. Press <Legend Clear> to clear the text from line 1.
2. With font size set at the default of 9, enter MULTIPLE on line 1, then press <Enter>
>
3. Press <Shift> + <
4. Enter FONT on line 2, then press <Enter>.
?
5. Press <Shift> + <
6. Enter SIZES on line 3.
7. Press <Print>.
FONT
SIZES
> three times to increase the font size to 12.
> 8 times to decrease the font size from 12 to 4.
29