T8: Creating A Terminal Block Label - Brady TLS2200 User Manual

T8: Creating a Terminal Block Label

Note: This example assumes you have the terminal block marker roll PTLTB-400-375
loaded in your printer.
Label to be printed:
Setup Status:
H Justify
V Justify
Rotation
Format
Legend Type
1. Press <Shift> + <Form Clear> to delete all lines of text and reset the font to the default
value of 6.
2. Press <Func> + <Setup> to access the Setup Menu.
3. Press the <
4. Press the <
Press the <
5.
With the cursor highlighted on Terminal Block, press <Enter>.
6.
7. Use the <
(.23622 in.), then press <Enter>.
8. Press <Func> + <Exit> to exit back to the Text Editor screen.
9. With the cursor highlighted on line one, press <Shift> + <
size from 6 to 7.
10. Enter 101 on line one.
46
Center
Center
0 Degrees
Component
Text
> key six times to select Units, then press <Enter>.
▼
> or < > keys to toggle the Units to Metric, then press <Enter>.
▲ ▼
> key four times to select Continuous, then press <Enter>.
▲
> and < > keys as needed to set the terminal block repeat value to 6 mm
▲ ▼
101
102
103
104
105
106
107
108
109
110
™
TLS2200 Thermal Transfer Printer User Manual
> once to increase the font
▲