Brady TLS2200 User Manual page 41

If you do not remember the correct part for the list you want to edit, place the cursor on
your list name (after choosing Select), then press the <
displays on the Text Editor screen, providing that you entered it when you created the list.
See Creating a List earlier in this section. Press the <
In order to delete or edit a legend in a list, you must recall the legend. When you activate
a list, the last legend you entered will display on the Text Editor screen. However, this does
not mean that the legend is recalled.
2. Recall a legend from the active list.
•
Press <Func> + <Recall> to recall the next legend in a list.
•
Press <Func> + <Shift> + <Recall> to recall the previous legend in a list.
If you want to delete a legend:
Press <Func> + <Shift> + <Delete>. The legend is deleted from the active list.
If you want to change characters in a legend:
1. Edit the legend following the normal guidelines for non-list legends.
All style options for editing non-list legends can be used to edit legends within a list, and
different legends can have different styles even though they belong to the same list. Style
options include:
• H Justify
• V Justify
Press <Func> + <Save> to save the edited legend.
2.
3. When the prompt appears "Save as New" or "Save as Current", select "Save as Current".
Your edited legend is now saved to the list.
Selecting "Save as New" will add the legend to the end of the list. See Appending a List later
in this section for details.
Using Edit Mode
The Edit mode can be toggled to on or off. Use the Edit mode within the List Menu to modify
a list when:
•
a part is not installed in the printer.
-or-
•
a part other than the part the list was created for is installed in the printer.
To use Edit mode, follow the instructions below:
1. Press <List> to activate the List Menu.
Press the <
2.
3. The Edit mode defaults to Off. Use the <
You will be prompted with all list names stored in the printer (up to 10). Use the <
4.
and < > keys to select the list you want to edit, then press <Enter>.
▼
32
• Format
• Font Size
> key three times to select Edit, then press <Enter>.
▼
> key. The correct part
►
> key to return to the list name.
◄
• Rotation
> key to select On, then press <Enter>.
▼
™
TLS2200 Thermal Transfer Printer User Manual
>
▲