R3000X Remote Control Installation; Js10 Joystick; S35 Nfu Lever Installation - Simrad AP16 User Manual

3.10

R3000X Remote Control installation

R3000X should be mounted in the supplied bracket that can be
fixed by four mounting screws. The unit is weather proof and
can be mounted outdoor.
REMOTE CONTROL
3.11

JS10 Joystick

Refer to separate installation instructions supplied with the JS10
Joystick.
3.12

S35 NFU Lever installation

The unit is mounted to a bulkhead or panel by two screws from
the front. The cable is connected to the junction unit according to
Figure 3-11. Interchange the Port and Stbd wires to the screw
terminals if necessary to make the direction of the lever
movement coincide with the direction of the rudder movement.
20222121A
R3000X
Figure 3-10 R3000X connection
AUTOPILOT COMPUTER
TB1 TB2 NFU
4
1
Installation
47