System Data Menu
To exit the menu, press any mode key (STBY, AUTO or NAV).
SimNet Data Screen
20222121A
Configuration and setup
Select System data by pressing the
STBY 10 button.
Steer compass
Steering Compass readout,
M=Magnetic, T=True
Rudder
Rudder angle. Between zero and 26
degrees.
Input voltage
Mains voltage on input terminals.
Select STANDBY mode.
Press en hold the NAV/WIND button
for 5 seconds to enter the Installation
Menu.
Press the STBD 1 button to select
"SERVICE".
Confirm by pressing the STBD 10
button.
Select the screen by pressing the
STBD 1 button and confirm by
pressing the STBD 10 button.
The menu provides you with status
information about the different
SimNet messages used by the system.
71