Vertex Standard VXR-7000 Service Manual page 11

Channel Data Items
Ch: Channel Number
This 2-digit number (01 - 16) is used to identify the chan-
nel. Channel numbers occur in sequence, and their order
can not be changed.
Rx Freq.: Edit Receive (or simplex) Frequency
Use the [0] - [9] keys to enter the desired channel fre-
quency directly, and press the [E
CTCSS Decoders: Toggle CTCSS Decoder ON/OFF,
sets CTCSS Frequency
Press the [S ] bar to toggle the CTCSS Decoder "on"
PACE
or "off," or press the [E
S " window, from
E L E C T
which you may select a
CTCSS frequency using the
[A ] key; press [E
RROW NTER
again to accept the selected
tone, or press [E ] key to
SC
cancel.
DCS Decoders: Toggle DCS Decoder ON/OFF, sets
DCS Code #
Press the [S ] bar to toggle the DCS Decoder ON or
PACE
OFF, or press the
[E ] key to
NTER
d i s p l a y t h e
S
"C "
ODE ELECT
window, from
which you may
s e l e c t a D C S
code using the [A ] key; press [E
RROW
cept the selected code, or press the [E
] key.
NTER
] key to display the "T
NTER
]
] again to ac-
NTER
] key to cancel.
SC
CE27 Main Screen (Scrolled Right)
Operating Manual Reprint
W/N: Wide/Narrow Channel Spacing
This function selects the channel spacing environment in
which the VXR-7000 operates.
W (Wide) =
N (Narrow) = 12.5 kHz Channel Spacing, ±2.5 kHz
Press the [S
PACE
ing environment.
Clk Sft: Enable/disable the CPU Clock Shift
This function is only used to move a spurious response
"birdie" should it fall on a current frequency.
ONE
Press the [S
PACE
NSQ Mode: Noise Squelch Mode
This command selects the manner of setting of the Squelch
threshold level.
User = The squelch threshold level is fixed via the
"NSQ Lv" parameter (NSQ Lv: 0 [min.] ~
255 [max.]).
Prpgm =
mined via the dealer programming.
Press the [S
PACE
NSQ Lv: Noise Squelch threshould level
Use the [0] - [9] keys to enter the desired Squelch thresh-
old level directly, and press the [E
values are 0 (min.) ~ 255 (max.).
25 kHz Channel Spacing, ±5 kHz De-
viation.
Deviation.
] bar to select the desired channel spac-
] bar to toggle "yes" or "no."
The squelch threshold level deter-
] bar to select the desired NSQ Mode.
] key. Available
NTER
11