Page 1
VXR-9000E peRating anual Vertex Standard LMR, Inc.
Page 3
Designed to mount in a standard 19-inch rack, the VXR-9000E is crafted using the latest computer-aided design and manufacturing processes, to ensure a high level of reliability to users. Important channel frequency data is stored in EEPROM, and is easily programmable by a Servicing Technician or Dealer using an IBM compatible personal computer and the FIF-10A (or FIF-12) + CT-104A USB Programming Interface and CE60 Software.
“momentary” press. The PF key func- tions may be customized, via programming by Speaker your VERTEX STANDARD dealer, to meet your The internal speaker is located here. communications network requirements. Note that some functions may require the purchase of optional internal accessories.
Page 5
Programming of the callsign is per- dynamic range of the repeater’s transmitted and re- formed by your Vertex Standard dealer. ceived audio signal. When you enable this function, the signal-to-noise ratio can be improved by reduc- ing the transmitted audio dynamic range.
Page 6
Morse Code, once. Programming of the This function provides to “Monitor” to cancel CTC- callsign is performed by your Vertex Standard deal- SS and DCS squelch decoding, so long as the PF key assigned to “Monitor M” is pressed and held in.
Page 7
“Transmit” to enable (“On”) or dis- Press (or Press and hold in for one second) the PF able (“Off”) the transmission of the VXR-9000E. key assigned to “Squelch” to override the Squelch action (CTCSS, DCS, and Noise Squelch), so as to...
Output, RSSI, etc. are available. Moreover, tenna, or the “RX” jack on the duplexer. The in- the VXR-9000E provides eight ports that can be put impedance requirement is 50 Ohms. programmed for various input or output signals, or for control functions.
Page 9
DB-25 Connector Port 5: TX ATT The VXR-9000E repeater is provided with a 25-pin DB-25F female connector for interconnections to ac- This output is intended for controlling an external cessories.Use a DB-25M 25-pin male connector to coaxial switching relay. It is an open drain output connect accessories to the repeater.
Page 10
Programmable I/O “1” ~ “8” I/O Port This pin is an output for low speed receiving data The VXR-9000E provides eight ports signals, with the data being extracted after the de- (PIO) that can be programmed for emphasis and low pass filter stages.
“hardline” that may shorten the useful life of the equipment. cable to reduce losses. Try to locate the VXR-9000E (Mounting Rack) in an Repeater antennas should have an impedance of 50 environment that is also comfortable for service per- ...
Installation Power Supply Backup Power Supply Operation of the VXR-9000E requires a power For uninterrupted operation during power failures, source capable of providing at least 8 Amps continu- a 12-volt rechargeable type battery (55-Ah or more ously at 13.6 Volts DC. The FP-1030 (External) and...
Knob Cap (RA0506900) ..........6 Encryption Unit FVP-25 Name Plate (RA0508500)..........1 Rolling Code Encryption Unit FVP-35 Operating Manual ............1 USB Programming Interface FIF-10A USB Programming Interface FIF-12 CT-104A PC Programming Cable (for FIF-10A and FIF-12) VXR-9000E FM R EpEatER pERating anual...
Page 14
Note VXR-9000E FM R EpEatER pERating anual...
Page 15
iSpoSal of youR lectRonic anD lectRic quipMent Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Electronic and Electric Equipment should be recycled at a facility capable of han- dling these items and their waste byproducts. In EU countries, please contact your local equipment supplier representative or service center for information about the waste collection system in your country.