Alamo Industrial Great White M8000MD Operator's Manual page 62

Schedule for checking Components, Fluid Levels, Greasing and Maintaining Blowers.
MAINTENANCE
TO PREFORM
Engine Oil Level
Engine Coolant Level
Engine Air Cleaner
Hydraulic Oil Level
Check Engine Radiator
Check Hydraulic Oil Cooler
Check Hydraulic Oil Temp.
Clutch: Cross Shaft
Fan Shaft Assembly Bearings
Oil All Chain Couplings
Engine Oil Change
Engine Oil Filters
Clutch: Throw-Out Bearings
Gearbox (Mobil SHC 75W-90)
Grease All Bearings
Hydraulic Filters Replacement
Engine Fuel Filters
Spout Bearings
Engine Coolant Change
Hyd. Oil Change (ISO 32 Hyd. Oil)
Fan Shaft Bearings
Engine Water Filters (if applicable)
Oil Bath (ISO68 Bar Chain Oil)
* NOTE: On a new engine, change oil and oil filter at 50 Hrs. and every 100 Hrs. thereafter.
NOTE: Hydraulic oil filter should be changed at 50 Hrs. and every 500 Hrs. thereafter.
M-8000MD 12/04
© 2004 Alamo Group Inc.
MAINTENANCE
Daily
Weekly
(8-10 Hrs.)
X
X
X
X
X
X
X
X
X
X
Maintenance Section 5-5
150 Hrs. 500 Hrs.
100 Hrs.
or
1 Month 6 Months
X
X
X
2000 Hrs.
or
or
1 Year
X
X
X
X
X
X
X
X
X
X