Connecting The Snowblower To Unit - Alamo Industrial Great White M8000MD Operator's Manual

CONNECTING THE SNOWBLOWER TO UNIT

To mount on a front-end loader, the unit easily attaches by using a quick coupler. Ensure the coupler is locked in
place before raising the boom.
Snow Blower Pre-Operation Inspection/Service
Before each season of use, a complete inspection and
service is required to ensure the implement is in a good
and safe working condition. Damaged and/or broken
parts should be repaired and/or replaced immediately.
To ensure the implement is ready for operation, conduct
the following.
Ensure that the Manual Holder secured to the
Implement with the Operator's Manual inside.
Ensure all decals are in place and legible. Replace
missing, worn, and non-legible decals.
NOTE: The snow blower Operator's Manual and affixed
Decals contain important instructions on the safe and
proper use of the snow blower. Maintain these important
safety features on the snow blower in good condition
to ensure the information is available to the operator at
all times.
M-8000MD 12/04
© 2004 Alamo Group Inc.
OPERATION
FIGURE 4
Operation Section 4-6
FIGURE 5