Spout Installation - Alamo Industrial Great White M8000MD Operator's Manual

ASSEMBLY

SPOUT INSTALLATION

The Spout has been removed for shipping purposes. FIGURE 1 To install the spout to the main body of the
snowblower use an overhead hoist. Align bolt holes on spout with flange on base unit. Spout should face the side
of the machine. Securely tighten fasteners once all bolts have been installed. FIGURE 2
FIGURE 1 UNIT AS SHIPPED
Installed
Spout
FIGURE 2 SPOUT INSTALLED
M-8000MD 12/04 Assembly Section 3-2
©
2004 Alamo Group Inc.