Field
Router
Advertisement
PPPoE Relay
DNS Proxy
After finishing the settings, click the Apply button to apply the settings.
4.3.2
WAN
Click Internet > Wan to display the Wide Area Network (WAN) Settings page.
This page is used to configure the parameters of WAN connection. On this page, you
may choose the proper WAN connection type and configure the parameters related to
the connection type.
The parameters on this page are described as follows:
Field
software on the interior network.
Enable or disable router advertisement. After enabling this
function, APs will send broadcast message or send back
message to show their existence.
Enable or disable PPPoE Relay. After enabling this
function, the local PC can directly start PPPoE dial-up in
the gateway mode.
Enable or disable DNS Proxy. After enabling this function,
the devices on the LAN where AP acts as a proxy can
send domain resolution request to AP.
Description
Description
24