Edimax BR-6224n Usre Manual page 29

This page is used to configure the LAN parameters. This page allows you to
configure LAN interface properties, DHCP server properties, and other parameters
related to LAN.
The parameters on this page are described as follows:
Field
IP Address
Subnet Mask
MAC Address
DHCP Type
IGMP Proxy
IGMP Snooping
UPNP
The IP address of the LAN interface. The default IP
address is 192.168.2.1.
The subnet mask of the IP address of the LAN interface.
The default subnet mask is 255.255.255.0.
Display the current MAC address that LAN interface uses.
Enable or disable DHCP service. You can select Server or
Disable in the drop down list. The default setting is
Server, it indicates DHCP service is enabled.
After enabling DHCP service, you can configure the
following parameters of the DHCP server:
Start IP Address: The start IP address of the DHCP
address pool.
End IP Address: The end IP address of the DHCP
address pool.
Subnet Mask: The subnet mask that DHCP server
assigns.
Primary DNS Server: The primary DNS server that
DHCP server assigns.
Secondary DNS Server: The secondary DNS server
that DHCP server assigns.
Default Gateway: The gateway that DHCP server
assigns.
Lease Time: The lease time of the IP address.
Statically Assigned: For binding MAC and IP.
Enable or disable IGMP Proxy.
Enable or disable IGMP Snooping. After enabling this
function, the packets of the IGMP broadcast will not be
sent to the LAN interface that does not belong to the
group.
Enable or disable the UPnP function. After enabling this
function, AP will provide automatic port-mapping for P2P
Description
23