Wan - Edimax Wireless Broadband Router User Manual

browser followed by port number 8080, e.g. 10.0.0.1:8080
(see below). You'll also need to know the password set in
the Password Setting screen in order to access the router's
web-based management.
Port T he port number of remote management web interface.
Enabled Select "Enabled" to enable the remote management
function.
Click <Apply> at the bottom of the screen to save the above
configurations. You can now configure other advance sections or start
using the router (with the advance settings in place)

2.2 WAN

Use the WAN Settings screen if you have already configured the Quick
Setup Wizard section and you would like to change your Internet
connection type. T he WAN Settings screen allows to specify the type of
WAN port connect you want to establish with your ISP. T he WAN settings
offer the following selections for the router's WAN port, Dynamic IP, Static
IP Address, PPPoE, PPTP, L2TP, Telstra Big Pond, DNS and DDNS.
31