Step4
After finishing settings, click the Apply button, and then BR-6224N starts
to acquire the parameters assigned by the DHCP server, such as the IP
address, and the DNS address.
3.3 Connection Introduction for Ethernet User
In the gateway mode, by default, the NAT function of the BR-6224N is enabled. Users
using the LAN interfaces of the BR-6224N will use the same IP address of the WAN
interface to access the Internet.
Usually, users using the LAN interfaces of the BR-6224N need to set the network
adapter to be Obtain an IP address automatically. If any user wants to manually set
the TCP/IP properties, please refer to 3.1 TCP/IP Settings.
3.4 Connection Introduction for Wireless User
By default, the AP function of the BR-6224N is enabled. User that uses the wireless
network adapter can follow the steps below to finish setting.
Step1
Enable your wireless network adapter on your PC, and make sure that
Wireless Zero Configuration tool is available. Right click the Wireless
Network Connection icon and select View Available Wireless
Networks.
12