Table of Contents
Advertisement
If you want to use PPTP service, please select PPTP connection type. On the Wide
Area Network (WAN) Settings page, select PPTP as the WAN connection type, and
the following page appears.
On this page, enter the server IP, the username, and the password provided by the
ISP. Set the IP address, the subnet mask, and the default gateway. When the
Address Mode is Dynamic, the IP address, the subnet mask, and the default
gateway of the WAN interface are automatically assigned by the DHCP server.
After finishing the settings, click the Apply button to apply the settings.
4.3.3
Advanced Routing
Click Internet > Advanced Routing to display the Static Routing Settings page.
28
Advertisement
Table of Contents
