Operation Mode; Internet Settings - Edimax BR-6224n Usre Manual

4.2 Operation Mode

Click the Operation Mode to display the Operation Mode Configuration page.
BR-6224N provides three types of operation modes, including Bridge, Gateway, and
WISP modes.
The parameters on this page are described as follows:
Mode
Bridge
Gateway
WISP
NAT
Enabled
After finishing setting, click the Apply button to apply the settings.

4.3 Internet Settings

In the gateway mode, the following figure shows the navigation menu of the Internet
settings:
In the bridge mode, AP acts as a hub.
In the gateway mode, BR-6224N allows routing between
WAN and LAN, or WAN and wireless network.
In the WISP mode, all the Ethernet interfaces can access
the Internet by wireless routing.
This function can only be used in the gateway mode. After
enabling NAT, it can provide address translation between
the interior network and the exterior network for LAN and
wireless network.
Description
20