Table of Contents
Advertisement
Suppose that there are two APs. One is AP1, the other is AP2. Enable the DHCP
server of AP1 and AP2.
The following table shows the settings of AP1 and AP2.
- Set AP1
Step1
Enter http://192.168.1.1 in the IE address bar, and then enter the user
name (by default, admin) and the password (by default, admin) to log in
to the Web page.
Step2
On the Basic Wireless Settings page, set the WDS mode to be Bridge
Mode, and enter the MAC address of the AP2.
78
Advertisement
Table of Contents
