Chapter 9
Audible Alarms and UPS Conditions
Battery Service
Test/Alarm
Reset Button
EATON Powerware
Troubleshooting
This section explains:
S
UPS alarms and conditions
S
How to silence an alarm
S
Service and support
The UPS has an audible alarm feature to alert you of potential power
problems. Use Table 11 to determine and resolve the UPS alarms and
conditions.
Site Wiring Fault
Battery Test
Figure 25. Alarm Indicators
Silencing an Audible Alarm
Before silencing an alarm, check the alarm condition and perform the
applicable action to resolve the condition (see Table 11).
To silence the alarm for an existing fault, press the
status changes, the alarm beeps, overriding the previous alarm silencing.
®
9125 Two-in-One UPS (5000/6000 VA) User's Guide
Overtemperature
Overload
Indicator Legend
Unlit
Lit
Flashing
button. If UPS
S
164201513 Rev B
www.powerware.com
51