Operation - Special Features
To Activate/Deactivate Tone Squelch (TSQ) on a
Channel
1. Use
/
to select the channel you want to put in or take out of 'QUIET' mode.
2. Press and hold [TSQ] for 2 seconds.
Two beeps will sound and the TSQ icon appears on or disappears from the LCD
display.
Receiving a Selcall
While in TSQ mode, when UH8080NB receives a code matching your Selcall ID, it will
perform the following operations:
a) Automatically responds to the caller by transmitting Acknowledge Tones.
b) Informs you that a caller is on the Channel by emitting a CALL ALARM
(Default Alarm Setting: four successive beeps in a regular interval for 10 seconds.
Refer to p.40, 'Alarm Mode' for other alarm settings) and displays the CAL icon.
c) Flashes the TSQ icon for about 20 seconds allowing you to use the PTT button. If
you are not able to respond within the 20 second period, TSQ icon stops flashing and
'QUIET' mode resumes.
The UH8080NB can decode a Selcall call even though not in 'QUIET'
mode.
NOTE
UNIDEN UH8080NB
35
UHF CB Transceiver