Scanning; Add/Remove Channels From Scan Memory - Uniden UH8080NB Owner's Manual

Operation

Scanning

The
UH8080NB has a scanning feature
that allows you to search for active channels
automatically.
SCAN only checks channels or frequencies
that are in the SCAN Memory, which are
indicated by the M (memory) icon. The
UH8080NB has two SCAN Memory modes;
Open Scan (OS) mode and Group Scan (GS)
mode, to give you flexibility and allow you to
use the radio more effectively.
Furthermore, any combination of the three channel groups can be scanned by pressing
[POLICE] during scan to select the desired channel groups.
1. Press [SCAN] to start Scanning. The SCAN icon appears.
2. The scan direction can be changed at any time by pressing / .
3. Press [SCAN] to stop Scanning.

Add/Remove Channels from SCAN Memory

Select which Scanning Mode you wish to use
- OS or GS. Select the channel you want to store.
Press and hold [MEM] to store. MEM icon appears
and two beep tones sound.
To remove the channel from SCAN memory,
press and hold [MEM] once more.
The MEM icon disappears.
19
UNIDEN UH8080NB UHF CB Transceiver