Operation
Roger Beep
1. Press [MENU/ENTER] five times.
The roger beep setting flashes.
2. Press
/
setting between ON or OFF.
3. Press [MENU/ENTER] to store the
setting.
4. Press and hold [MENU/ENTER] to save
& exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE
CTCSS (Continuous Tone Coded Squelch System)
Press
/
Press [DCS/CTCSS].
CTCSS icon flashes.
Press
/
select the desired CTCSS code 01 - 38.
Press [DCS/CTCSS] once to store the new
setting.
To turn off CTCSS (or DCS) select the oFF code
during setting.
UNIDEN UH5060
to change the
the desired channel to use CTCSS.
on the Remote SPK/MIC to
22
UHF CB Transceiver