Volume Sync - Uniden UH8080NB Owner's Manual

Operation

Volume Sync

Use this set which speaker(s) the Volume
/ buttons control.
Set 01 to control the speaker volume of the
Base unit only.
Set 02 to control the speaker volume of
Remote MIC only.
Set 03 to control the speaker volume of both
Base unit and Remote MIC - both volume levels
will be synchronised.
1. Press [MENU] nine times.
The Volume Sync setting flashes.
2. Press /
3. Press and hold [MENU] to save & exit from the menu mode.
• The speaker that is not selected for control maintains its previous
volume setting.
• When an optional External Speaker is connected to the Ext.Sp. jack of
the base, it substitutes for the Base unit speaker which becomes muted.
NOTE
Therefore 01 MAIN & 03 SYNC control the External Speaker in place of
the base unit speaker.
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
NOTE
UNIDEN UH8080NB
to change the setting between 01, 02 or 03.
25
UHF CB Transceiver