Operating The Uhf Cb Radio In Duplex Mode - Uniden UH8080NB Owner's Manual

Operation
Operation with the aid of a Repeater Station (Duplex).
The signal coming from your radio is received by the Repeater Station and the re-
transmitted at the same time on another channel. This operation is called "Duplexing".
For example,
CH01 on Duplex Mode will Receive on CH01 but Transmit on CH31
CH02 on Duplex Mode will Receive on CH02 but Transmit on CH32 etc...
If you transmit on CH01 Duplex mode, you are actually transmitting on CH31 the
repeater station down-converts your signal and retransmits on CH01.

Operating the UHF CB Radio in Duplex Mode

For this example we are adopting CH01 as the
channel being used in your area for repeater use.
1. Press [MENU]. The duplex
setting flashes.
2. Press /
between ON or OFF (standard channel
numbering).
3. Press and hold [MENU] to save & exit from the
menu mode.
DUP icon displays when a selected channel
is set to Duplex mode.
• Only channels 01 - 08, and channels 41 - 48 are available for Duplex.
• Check with your local Retailer for information on available repeaters.
• If a button is not pressed within 10 seconds the UHF CB Radio will
NOTE
automatically exit the Menu Mode.
UNIDEN UH8080NB
to change the setting
18
UHF CB Transceiver