Introduction The Uniden UH8010S/UH8020S is designed to provide you with years of trouble free service. Its rugged components and materials are capable of withstanding harsh environments. Please read this Operating Manual carefully to ensure you gain the optimum performance of the unit.
Page 5
RJ45 type plug Channel Scan button Front MIC Jack Cover / Scan Memory (press & hold) Liquid Crystal Display (LCD) MIC - Front Microphone Jack Speaker Power Input Connection (13.8VDC) EXT SP - External Speaker Jack UNIDEN UH8010S/UH8020S UHF CB Transceiver...
Magnetic Antenna Mounting Bracket with with fuse* and M Adaptor** mounting screws* Windshield Mount** Power Cable Radio Bracket** (Ciger lead type)** Not Pictured: Elevated Feed 6.5dB Antenna kit (AT-870) *** * For UH8010S and UH8010S+ANT ** For UH8020S *** For UH8010S+ANT UNIDEN UH8010S/UH8020S UHF CB Transceiver...
Optional Accessories: • UHF Antenna • External Speaker Visit the UH8010S/UH8020S page on the website for more information on the availability of optional accessories; www.uniden.com.au for Australia UNIDEN UH8010S/UH8020S UHF CB Transceiver...
Radio Bracket 1. Attach the windshield mount to the radio bracket as shown in the image above. 2. Press the suction cup flat against the windshield and push the lever up to secure position. Suction cups will not stick well on a curved/textured or wet surfaces. NOTE UNIDEN UH8010S/UH8020S UHF CB Transceiver...
Pull back the rubber cover and move it down along the cord. Using the flat blade of a screwdriver or similar object carefully push the lock tab of the MIC plug towards the MIC cord and at the same time tug on the MIC cord to draw back the MIC plug. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
High quality Double-Sided tape can be found at good retail stores. Secure the front and back pieces of the MIC Hanger using the supplied binding screws. Locate a suitable mounting position. Apply high quality Double-Sided tape onto the flat area of the MIC Hanger back piece and then press firmly to the mounting position. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
Setting the Squelch Level Press the Power/Channel Selector momentarily. SqL shows and the current squelch level will flash. Turn the Channel Selector to select the desired squelch level. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
Page 13
If unwanted weak and noisy signals are getting through increase the squelch level (‘Squelch Gate’) to a medium level. Now only medium and strong signals get through. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
Programming the Instant Priority Channel Turn the Channel Selector to select the Priority Channel you prefer. Press and hold [INST] on the microphone for 2 seconds to store the new setting. icon appears. CALL INST UNIDEN UH8010S/UH8020S UHF CB Transceiver...
If there is a barrier that partially blocks your transmitted signal, the probability of another radio receiving the signal is very slim. Hills, tall buildings, metallic structures,...etc tend to act as a screen between radios. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
Page 16
This operation is called “Duplexing”. For example, CH01 on Duplex Mode will Receive on CH01 but Transmit on CH31 CH02 on Duplex Mode will Receive on CH02 but Transmit on CH32 etc... If you transmit on CH01 Duplex mode, you are actually transmitting on CH31 the repeater station down-converts your signal and retransmits on CH01. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
4. Press and hold to save & exit the menu mode. Only channels 01 - 08 and 41 - 48 are available for Duplex. Check with your local Retailer for information on available repeaters. NOTE UNIDEN UH8010S/UH8020S UHF CB Transceiver...
Group Scan and Master Scan modes share the same SCAN Memory. NOTE 1. Press and scanning starts. The S icon appears The scan direction can be changed at any time by rotating the channel selector left or right. 2. To deactivate SCAN, press UNIDEN UH8010S/UH8020S UHF CB Transceiver...
In this way, all group users will be able to have continual communication to or from other users. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
Page 20
RX only Channels (CH22, CH23, CH61, CH62 and CH63) will not be included in MASTER SCAN Mode even though they are stored in the GS Memory. Also, the channels which have the Duplex Setting will not be included in MASTER NOTE SCAN Mode. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
Page 21
2. Turn the Channel Selector or press to change the setting. P0: Master Scan is ON with the current GS channel memory. Open/ Group Scan is disabled. P1: Master Scan is ON with loading CH09-20 in GS. P2: Master Scan is ON with loading CH21-30, 39, 40 in GS. P3: Master Scan is ON with loading CH49-60 in GS. P4: Master Scan is ON with loading CH61-70, 79, 80 in GS. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
Page 22
- o4). CTCSS: DCS: 5. Press to store the setting. 6. Press and hold to save & exit the menu mode. If a button is not pressed within 10 seconds the UHF CB Radio will automatically exit the Menu Mode. NOTE UNIDEN UH8010S/UH8020S UHF CB Transceiver...
To use GS Mode Scanning; 1. Press 3 times. Scn shows and the oS/GS setting flashes. 2. Turn the Channel Selector or press to change the setting to GS. 3. Press to store the setting. 4. Press and hold to save & exit the menu mode. GS Scanning checks the Instant Priority Channel for activity every 1.5 seconds. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
- o4). To turn off CTCSS/DCS select the oF code. 3. Press to store the setting. 4. Press & hold to save & exit menu mode. The CTCSS/DCS code displays for the selected channel. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
& exit menu mode. Selecting the Call tone 1. Press 6 times. The call tone setting flashes. 2. Turn the Channel Selector or press to change the setting between 1, 2, 3, 4 and 5. 3. Press to store the setting. 4. Press and hold to exit from the menu mode. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
2. Turn the Channel Selector or press to change the setting between Blue, Red, Purple(magenta), Green, Cyan, Yellow and Clear (white). 3. Press to store the setting. 4. Press and hold to exit from the menu mode. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
& exit menu mode. LCD Flip 1. Press 11 times. The Flip setting flashes. 2. Turn the Channel Selector or press to change the flip orientation. 3. Press to store the setting. 4. Press and hold to save & exit menu mode. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
The above situations are not a fault of the radio but a symptom of mixed wideband and narrowband radios in current use. It is expected that as older wideband radios are phased out this issue will be eliminated. UNIDEN UH8010S/UH8020S UHF CB Transceiver...
UNIDEN UH8010S, UH8010S+ANT, UH8020S UHF CB Transceiver IMPORTANT: Satisfactory evidence of the original purchase is required for warranty service Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below. Warrantor: The warrantor is Uniden Australia Pty Limited ABN 58 001 865 498 (“Uniden Aust”).
Page 34
Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden at the addresses shown below. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.