Group Scan (Gs) Mode - Uniden UH8080NB Owner's Manual

Operation

Group Scan (GS) Mode

GS Mode has no channels in the SCAN Memory
by default. Channels must be added to the
GS SCAN Memory before group scan can start.
To add/remove channels from GS SCAN Memory,
refer to p.19.
Includes the accessory feature Priority Watch
which allows you to monitor the Instant Priority
Channel while scanning (see p.15 for setting
Instant Priority Channel and p.22 to turn on
Priority Watch).
GS Scanning checks the Instant Priority Channel for activity regularly when Priority
Watch is ON.
If the Priority Channel becomes active the radio will stay on that channel for as long as
the signal is present. If the received signal ceases, Priority Scanning continues after 3
seconds.
If scanning stops on a channel which is not a Priority Channel, UHF CB Radio will
continue monitoring the Priority Channel for activity while listening to the active one.
To select GS Scan Mode:
1. Press [MENU] three times.
The GS setting flashes.
2. Press /
3. Press and hold [MENU] to save & exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
NOTE
UNIDEN UH8080NB
to change the setting between ON and OFF.
21
UHF CB Transceiver