Operation
Busy Channel Lockout
If the channel is already in use, you can prevent
the UHF CB Radio from transmitting . This is
particularly important when using CTCSS/DCS.
1. Press [MENU] five times.
The BCL setting flashes.
2. Press
/
setting between ON or OFF.
3. Press and hold [MENU] to save &
exit from the menu mode.
If a button is not pressed within 10 seconds the UH8080NB will
automatically exit the Menu Mode.
NOTE
Roger Beep
1. Press [MENU] six times.
The roger beep (ROGER) setting flashes.
2. Press
/
setting between ON or OFF.
3. Press and hold [MENU] to save
& exit from the menu mode.
If a button is not pressed within 10 seconds the UH8080NB will
automatically exit the Menu Mode.
NOTE
UNIDEN UH8080NB
to change the
to change the
23
UHF CB Transceiver