Paper Transfer; Transfer Roller; After Installing A New Transfer Roller - Ricoh M118 Service Manual

4.9 PAPER TRANSFER

4.9.1 TRANSFER ROLLER

1. Front cover ( p.4-2)
2. Remove the AIO.
3. Remove the transfer roller [A] (Bushing x 1, spring x 2, gear x 1) as shown above.

Do not touch the transfer roller surface, when reinstalling the new transfer roller.

After installing a new transfer roller

1. Enter the "Maintenance mode".
2. Select "Engine Maintenance", and then press "OK" key.
3. Select "Reset Transfer Unit" and then press "OK" key.
4. Press the left key "Execute" of the "Selection keys".
5. Exit the "Maintenance mode".
SM 4-51
Paper Transfer
M118/M119