Updating The Engine Firmware - Ricoh M118 Service Manual

5.3.3 UPDATING THE ENGINE FIRMWARE

Procedure
When updating firmware, always disconnect any other cable(s) than the one being used for the
update operation.
(When updating firmware via USB cable, first disconnect any network and phone line cables, and
when updating firmware via LAN cable, first disconnect any USB and phone line cables.)
1. Prepare:

Computer: Windows XP/Vista/7, Windows Server 2003/2003 R2, 2008/2008 R2

USB cable or LAN (Local Area Network) cable
2. Download the firmware files to your computer.

FwUpdateToolSP.exe (Service Mode execute file)

Setting.ini (Parameter setting)

yyy.bin (Engine Firmware)
3. Make a folder on a local drive of your computer and save the files there.
4. Connect a computer and the machine through a network or directly by USB.
5. Click the "FWUpdateToolSP.exe" file to execute the updating program.
6. For a USB connection, click "Eng. F/W Update (USB)" [A]. For a network connection, enter
the machine's IP address in "Machine IP" [B], and then click "Eng. F/W Update (NET)" [C].
7. Check the firmware update tool window for messages and the update's current percentage of
completion.
SM 5-25
Firmware Updating
M118/M119