4.14 IMAGE ADJUSTMENT
4.14.1 REGISTRATION ADJUSTMENT
User Adjustment
The paper registration can also be adjusted with the user mode ("User Tools"). For details, see the
"User Guide".
Service Adjustment
1.
Print the test page (
Print out the test pattern before changing the paper registration setting.
2.
Enter the "Maintenance mode".
3.
Select "Engine Maintenance", and then press "OK" key.
4.
Select the "Registration", and then press "OK" key.
(1): Feed Direction
(2): Vertical Adjustment
(3): Horizontal Adjustment
(4): Print Area
5.
Press the "Up" or "Down" keys to set the registration value from -15 to +15 (that is, from -1.5
to +1.5 mm, in 0.1 mm increments).
Increase the value to shift the print area in the plus direction.
Decrease to shift in the minus direction.
6.
Adjust the margins of the test page so that they are equal in size.
SM
p.6-9).
4-71
Image Adjustment
M118/M119