PM Intervals
The machine displays "Fuser life end notice", "Transfer roller life end notice" or "Life End
of Paper Feed Roller Unit" when one of these counters reaches each yield.
Counter Reset
The process below shows how to reset the yield counters.
1.
Enter the "Maintenance mode".
2.
Select "Engine Maintenance", and then press "OK" key.
3.
Select "Reset Fuser Unit", "Reset Transfer Unit" or "Reset Paper Feed Rol Life" and then
press "OK" key.
4.
Press the left key "Execute" of the "Selection keys".
5.
Exit the "Maintenance mode".
M118/M119
3-2
SM