4.8 PAPER FEED AND EXIT
4.8.1 PAPER FEED ROLLER
1.
Pull out the standard paper tray.
2.
Remove the AIO.
3.
Set the machine with the rear side facing down, resting on the table.
4.
Slide the paper feed shaft [A] to the left side (
5.
Slide the paper feed roller [B] to right side, and remove it (hook).
After installing a new paper feed roller
1.
Enter the "Maintenance mode".
2.
Select "Engine Maintenance", and then press "OK" key.
3.
Select "Reset Paper Feed Rol Life" and then press "OK" key.
4.
Press the left key "Execute" of the "Selection keys".
5.
Exit the "Maintenance mode".
SM
x 2).
4-39
Paper Feed and Exit
M118/M119